This machine is designed for large square lithium-ion battery, use Z-shaped stacking method. The machine through four manipulator to take the cathode and anode electrodes from the material cabinet to the position taken place on the second platform, after framing station and then placed on the stacking platform, it is with automatic clamping device.
Machine spec
item |
||
Suitable battery core specs |
thiskcness(mm) | 0~20 |
width(mm) | 150~200 | |
length(mm) | 250~300 | |
Tabs length(mm) | Q≤30 | |
vacuum |
Connect the user’s vacuum source(match the vacuum
magnetic valve |
|
tem\humidity | 5-45℃; 5-65% | |
Compressed air |
pressure 0.5-0.7Mpa(5kgf-7kgf/cm2)
using volume 200L/min dry(with filter device) |
|
Single piece efficiency | 2~2.5s/pcs | |
Single cell making time | 20S-40S(according to the length) | |
Accuracy for
Electrode And separator |
center error<±0.5mm | |
stacking core width |
Min: anode electrode +0.6mm 、
Max: anode width+1.3mm |
|
Stacking layer | If within the thickness allowed range,can be set | |
Battery core thickness | ≤20 | |
fixture | Suitable the single side tab | |
Take down | Worker take down and taping |
Video Link:(https://youtu.be/oXC5OincX58)