Key Features:
* Automatic coil material separator servo constant tension control, Z-shaped automatic lamination.
* The number of laminations can be automatically controlled according to the preset setting;
* Using compatibility design, the battery size change can be realized by adjusting the positioning fixture, the adjustment range is large, and the lamination accuracy is guaranteed;
* PLC control, HMI operation, easy to use and maintain;
*Electrode manual loading, automatic positioning, mechanical hand vacuum suction cup automatic suction, automatic stacking;
* Left and right movement is controlled by pulse motor, which is precise and convenient for fine adjustment. 
* Can be used in the glove box;

Technical Parameters：
* Laminations: Z-shaped laminations, separator for the roll;
* Operation Mode: The manipulator automatically takes the material and stacks the piece, and automatically pulls the separator constant tension control;
* Suction Vacuum: Better than-65Kpa;
* Laminate Precision: uniformity ≤± 0.3mm (relative position dimension between electrode, stacking layers 25)
* Electrode Width: 40~90mm;
* Electrode Length: 40 ~ 100mm (ear direction, excluding ear size);
* Tab Length: Max.15mm;
* Lamination Thickness: Max.15mm, lamination number Max. 100 can be set;
* Separator Coil Diameter: Max. 200mm;
* Separator Winding Core: 3 inch winding core, expansion shaft clamping;
*Lamination Speed:Stack electrode 4~6s/piece, stack metal lithium 6~8s/piece (excluding the lamination preparation time of each cell);
* Power Supply: voltage single-phase AC220V ± 10% (customizable 110VAC), frequency 50Hz/60Hz, power 0.4KW;
* Gas Source: 0.5~0.8MPa;
* Equipment Size: L800 * W600 * H720mm;
* Weight: 120Kg;