AME-SKME-200 Fully Automatic Stacking Machine

1. Product Introduction

This equipment is primarily designed for Z-shaped stacking of battery cathode and anode electrodes with separators. It features robotic arm automatic material picking and stacking, automatic single/double sheet detection, automatic separator pulling, automatic deviation correction, constant tension control, automatic separator cutting with winding tail finishing, and automatic tape application — all fully automated. It delivers high stacking efficiency and precision. Different cell sizes can be accommodated by adjusting fixtures, making it ideally suited for the fabrication of stacked-type lithium-ion battery cells.

2. Product Features

• Roll-fed separator with automatic servo constant tension control and automatic deviation correction;

• Robotic arm automatic material picking and stacking, automatic single/double sheet detection, automatic separator pulling, automatic deviation correction, constant tension control, automatic separator cutting with winding tail finishing, and automatic tape application;

• Number of stacked layers is automatically controlled according to pre-set parameters;

• Compatibility design allows battery size changes to be achieved by adjusting positioning fixtures, with a wide adjustment range;

• Separate pressing jaw design for cathode and anode electrodes prevents cross-contamination of electrode materials;

• PLC control with HMI operation ensures convenient use and maintenance.

3. Main Technical Parameters

Parameter

Specification

Separator Tension Control

Roll-fed, automatic servo constant tension control

Separator Correction

Automatic deviation correction control

Electrode Pickup & Stacking Drive

Servo motor with ball screw control for electrode pick-up manipulator and stacking table

Stacking Method

Z-shaped stacking

Operation Mode

Robotic arm auto-pick/stack → auto single/double sheet detection → auto separator pulling → auto correction → constant tension control → auto separator cutting & winding tail finish → auto tape application

Stacking Accuracy

Alignment ≤ ±0.3 mm

Stacking Range

Cell: Min. L 80 × W 50 mm, Max. L 200 × W 200 mm

Stacking Thickness

Max. 30 mm

Separator Roll Diameter

Max. 250 mm

Separator Core

3-inch core, pneumatic expansion shaft clamping

Power Supply

Single-phase AC 220 V ± 10% (110 VAC customizable); 50/60 Hz; 3 kW

Compressed Air

0.5–0.8 MPa

Operating Environment

Recommended: ambient temperature 25 ± 3 ℃, humidity 30–90% RH, free from vibration and electromagnetic interference

Net Weight

800 kg

Installation Dimensions

L 1,800 × W 1,500 × H 1,800 mm


Video Link:(https://youtu.be/kPVaL7a3NJY)

INQUIRE

related products