AME-4200W 20KHz High-Power Ultrasonic Welding Machine

Chapter 1: Core Technical Parameters

1.1 Core System Technical Parameters

Technical Indicator

Specification Detail

Acoustic & Process Advantage

System Power Range

300 - 8000 W

Supports wide range of precision welding applications

Available Ultrasonic Freq

20 / 25 / 35 / 40 kHz

Full industrial frequency band coverage

Generator Input Voltage

220 V / 50 Hz / 60 Hz (±10%)

Compatible with complex industrial power fluctuations

Weld Time Precision

0.001 s

Millisecond-level digital time control

Power Regulation Mode

Stepless adjustment + Smart Constant Power

Real-time automatic compensation of acoustic energy loss

Acoustic Energy Transfer

≥ 92%

Excellent acoustic translation, industry-leading level

Power Factor (PFC)

≥ 0.95

Highly efficient, power-saving generator circuitry

System Operational Noise

< 75 dB

Quiet, ergonomic operation for cleanrooms

1.2 20KHz (4200W Peak) Dedicated Components Parameters

Sub-assembly

Performance Metric

Engineering Value / Standard

Transducer

Acoustic Center Freq

20 kHz ± 0.15 kHz

Transducer

Nominal Peak Power

4200 W (Peak surge capacity)

Welding Press

Actuation Pressure Range

0 MPa – 1.0 MPa (Fully stepless adjustable)

Welding Press

Weld Time Setting Range

0 – 60 s (Fully adjustable via touch screen)

Process

Typical Single Weld Cycle

≤ 0.5 s (Fast, high-throughput micro-joining)

Acoustics

Horn Vibration Amplitude

10% – 100% (Digitally controlled in 1% steps)

Quality Check

Digital Process Alarm Monitor

Automatic frequency tracking error, real-time power overflow, total energy budget overrun, and amplitude out-of-limits alarm and shutdown protection.

1.3 Smart Generator & Power Circuit Advantages

This welding equipment adopts a state-of-the-art smart switching power supply architecture, powered by a Class D high-efficiency amplification circuit and equipped with a dedicated Power Factor Correction (PFC) module (power factor ≥0.95). Compared to traditional analog circuitry, it delivers key operational advantages:

• Lower Energy Consumption: The elevated power factor and exceptional power conversion efficiency yield a dramatic reduction in electrical energy consumption during high-throughput operation.

• Absolute Process Stability: The circuit guarantees precise power delivery with minimal output fluctuations, ensuring superb micro-weld consistency across mass production runs.

• Excellent Anti-Interference Capacity: The digital generator seamlessly adapts to complex, unstable industrial grids, effectively neutralizing potential interference caused by grid voltage and frequency fluctuations.

Chapter 2: Welding Process Requirements & Product Adaptability

The system is meticulously engineered and customized for high-precision battery cell manufacturing processes, specifically adapted for welding the positive and negative current collectors (tab-to-foil) of both wound and stacked pouch battery cells:

Process Domain

Specific Requirements

Engineering Specification

Substrate Material

Core Ultrasonic Spec

20KHz / 4200W System Config

Negative Electrode

Foil Current Collector (Anode)

Copper Foil (Cu)  /  4 – 8 μm thickness

Negative Electrode

Tab Connection Material

Nickel Tab (Ni)  /  0.06 – 0.3 mm thickness

Positive Electrode

Foil Current Collector (Cathode)

Aluminum Foil (Al)  /  6 – 25 μm thickness

Positive Electrode

Tab Connection Material

Aluminum Tab (Al)  /  0.06 – 0.3 mm thickness

Cell Structure

Battery Cell Design & Layers

Wound or Stacked Pouch Cell / 10 to 60 Layers

Welding Mark

Standard Acoustic Weld Spec

4 mm × 20 mm standard matrix (Acoustic horn design customizable)

Tooling Quality

Horn Material & Lifespan

Premium imported High Speed Steel (HSS) / Negative > 300,000 cycles / Positive > 500,000 cycles

Tooling Quality

Anvil Material & Lifespan

Premium heat-treated High Speed Steel (HSS) / Negative > 300,000 cycles / Positive > 500,000 cycles

Chapter 3: Non-Ferrous Metals Welding Compatibility Matrix

This 20KHz welder is capable of joining a wide array of non-ferrous metal combinations. The standard compatibility matrix is provided below (where ■ indicates stable production-ready welding, and □ indicates combinations that require dedicated tooling and process optimization):

Weld Joint

Copper (Cu)

Alum (Al)

Nickel (Ni)

Silver (Ag)

St. Steel

Brass

Copper (Cu)

  ■  

  ■  

  ■  

  ■  

  □  

  ■  

Aluminum (Al)

  ■  

  ■  

  ■  

  ■  

  □  

  ■  

Nickel (Ni)

  ■  

  ■  

  ■  

  ■  

  ■  

  ■  

Silver (Ag)

  ■  

  ■  

  ■  

  ■  

  □  

  ■  

Stainless Steel

  □  

  □  

  ■  

  □  

  □  

  □  

Brass

  ■  

  ■  

  ■  

  ■  

  □  

  ■  

Note: For metal combinations marked with □, custom engineering packages (comprising specialized acoustic horn designs, custom anvil surfaces, and customized energy/pressure recipes) can be supplied to achieve robust, industrial-grade weld strength.

Chapter 4: Engineering Installation Conditions & System Dimensions

4.1 Site Engineering Environmental Conditions

Installation Parameter

Site Standard / Criteria

Electrical Supply

AC 220 V / 50 Hz (Requires independent ≥ 20 A circuit breaker)

Pneumatic Air Supply

0.6 – 1.0 MPa stable, dry, and filtered compressed air source

Environmental Temp

20°C ± 5°C (Recommended control limit for consistent acoustics)

Environmental Humidity

≤ 60% RH (Non-condensing)

Site Workspace Safety

Completely free of corrosive chemical vapors, liquids, and explosive gases

Floor Load Capacity

≤ 800 kg/m² load bearing capacity

4.2 System Physical Dimensions

System Sub-assembly

Physical Dimensions (L × W × H)

Ultrasonic Generator

415 mm (L) × 285 mm (W) × 135 mm (H)

Welding Head (Actuator Press)

590 mm (L) × 260 mm (W) × 490 mm (H)

4.3 Standard System Bill of Materials (BOM)

Item

Component Description

Brand Partner

Qty

Engineering Notes

1

Smart Ultrasonic Generator

AME Digital

1 unit

Integrated digital controller

2

Piezoelectric Transducer

AME High-Q

1 pc

Premium acoustic core module

3

Custom Precision Horn (Sonotrode)

AME Custom

1 pc

Specifically customized to buyer tab design

4

Machine Frame Stand & Press

AME Standard

1 unit

Sturdy, precision industrial build

5

Pneumatic Control System Elements

AirTAC (亚德客)

1 set

High-accuracy proportional valves & cylinders

6

Premium Ergonomic Work Bench

AME Heavy-Duty

1 unit

With vibration absorption leveling feet

7

Operational Maintenance Tool Kit

/

1 set

Includes metric hex keys, horn spanner, etc.

 

INQUIRE

related products