AME-RTCA300-2 Roll to roll intermit coating machine with 2m Oven

The AME-RTCA-300-2 Intermittent Lab Coater is a three-roll transfer coating machine, can be used for continuous and intermittent coating, suitable for a variety of substrate surface coating process. It is especially used in the lithium-ion battery industry. The equipment is designed for the convenience of researchers. It is designed to meet the requirements of coating accuracy and consistency. The drying effect is excellent. It is suitable for lithium-ion batteries, super capacitors, nickel batteries and other Ideal for secondary battery research and development and small trials

Features:

* Can switch freely to achieve continuous and intermittent coating;
* Substrate tension control, transport stability, configuration correction device;
* Hot air oven, the upper and lower double-sided blowing, high-quality drying effect;
* Three-roll transfer coating, wider coating window;
* Comma scraper measurement, with precision adjustment agencies, access to high-precision coating;
* PLC control,Touch screen operation, easy to use;
* Optional solvent recovery device;
* Installation environment requirements
* Machine head ambient temperature 25~30℃,Other:10~40℃;

* Machine head relative humidity: positive RH ≤35%, negative RH ≤98%,others ≤98%;

Specifications
Model	Battery Electrode Coating Machine AME-RTCA-300-2
Working Voltage	380V AC
Max. Power Consumption	15KW ( 50A Air breaker required )
Max. Coating Width	300mm
Thickness adjustable range	0-5mm
Coating thickness (after drying)	40 - 300um (for most kinds of battery electrode coating material) Note: The dried coating thickness results vary depending on the physical property of the coating material.
Thickness Precision	± 3µm (± 5µm at edges)
Coating Speed	200-1000 mm / minute
Mechanical Speed	200-2000 mm / minute
Max. Drying Temperature	150°C
Temperature Accuracy	±2.5°C
Heating Zone Length	1000mm*2
Suitable Viscosity	2000-12000(mpas)
Max. Unwinding Roll Diameter	300mm (OD)
Max. Coating Length	Depending on the coating and substrate thickness. Typically, 10um thick foil with 100um coating can get 600 meters of electrode length coated per run
Coating Modes	Using transfer coating technique ( Reverse comma ) for better uniformity Two available coating modes selectable on the control panel. Continuous mode Intermittent coating ( system performs coating, stops, coats again and so on. The length of the coating and break segments can be specified by the user ).
Slurry Stirring	SS316 Moving Rod
Exhaust Port Size	127mm O.D
Compressed Air	0.5-0.8 MPa (Air compressor not included. Please click here to order)
Product Dimensions	3000mm ( L) x 1100mm (W) x 1400mm (H)
Warranty	1 Year limited warranty with lifetime support Rusting and damage due to improper storage condition or maintenance are not covered by warranty
Net Weight	1100 kg
Shipping Dimension	350014001700mm