AME-TF1400 1400C 1-Zone Tube Furnace With Alumina Tube

AME-TF1400 series tube furnaces feature a chamber with Mitsubishi (Japan) high quality alumina fiber insulation and SiC heating elements. A dual-wall steel internal housing helps minimize heat loss to exterior surface. Furnace operation is controlled by Udian digital multi-segment controller with built-in digital communication port, allowing the user to connect to a PC for remote control and monitoring of the furnace. You can also save or export test results.

Features

· Compact, portable and lightweight design.

· Standard package includes set of stainless steel vacuum sealing flanges with valves and pressure meter.

· Microprocessor based self-tuning PID control provides optimum thermal process with minimal overshoot.

· Multiple atmosphere processes in a single cycle are possible (ex: binder burn out in air and parts sintering under rough vacuum or inert gas environment.)

· Built-in ammeter and dual voltmeters for easy monitoring and troubleshooting.

· Built-in computer interface.

Safety

· Overheat protection shuts down the furnace if temperature is outside of acceptable range (refer to controller's manual) or when the thermocouple is broken or malfunctions.

· Power failure protection resumes furnace operation right after the point of failure when power is reestablished.

Tube size	60mmOD x 1000mm L	100mmOD x 1000mm L	120mmOD x 1000mm L	150mmOD x 1000mm L
Installed heating element	6	8	8	8
Heating Zone	300mm	300mm	300mm	300mm
Maximum output	4 kW	6 kW	7 kW	9 kW
Furnace dimensions (LxWxH)	25" x 19" x 27"	25" x 19" x 27"	25" x 19" x 27"	25" x 19" x 27"
Shipping dimensions (LxWxH)	47" x 35" x 39"	47" x 35" x 39"	47" x 35" x 39"	47" x 35" x 39"
Unit/shipping weight (Lbs)	265/400	300/430	330/450	370/500
Electrical requirements	208-240 volts 50/60Hz single phase
Tube material	High purity (99%) Al₂O₃ alumina
Maximum / constant working temperature	1400°C (2552°F) / 1300°C (2372°F) * 2 hours maximum continuous run time at maximum temperature
Rated vacuum pressure	0.001 Pa / 0.0075 millitorr / 0.00001 mbar
Rated positive pressure	0.02 MPa / 150 torr / 3 psi
Refractory lining	Mitsubishi (Japan) high quality 1600 grade fiber alumina
Heating element and thermocouple	Silicon carbide (SiC) / S-type
Temperature controller	Udian (China) digital multi-segment controller
Max heating rate	5°C (41°F)/min above 1200°C and 10°C (50°F)/min below 1200°C (2192°F)
Heating vs constant zone length	11" / 5"
Temperature controller precision	+/- 1°C
Vacuum sealing flange kit	Stainless steel vacuum sealing flanges with one vacuum gauge, two valves and four thermal ceramic blocks.