Model

AME-MF1100

Power

1200W

Furnace size(mm)

100X100X100（LXWXH）

Dimensions

220X270X380mm（LXWXH）

Weight

13Kg

Supply voltage

220V

Phase

Single phase

 Control mode

30 program temperature control

1. 30 segment program temperature control can only be PID adjustment.

2. With over temperature protection break protection when over temperature or break the furnace heating circuit automatically cut off. (When the temperature of the electric furnace exceeds 1120 degrees or when the thermocouple is burned OFF, the AC relay ON the main circuit will automatically disconnect, the main circuit is disconnected, the ON light on the panel is off, the OFF light is on, and the limited protection of the electric furnace).

3 with 485 communication interface (standard when purchasing software).

3. with power off protection function, that is, after power off and then power to start the furnace, the procedure is not from the starting temperature, but from the power off the furnace temperature began to rise.

5. the instrument has the function of temperature self-tuning.

Over-temperature protection

Have

Overcurrent protection

Have

Break pair protection and display

Have

Furnace volume

1L

Furnace material

1. vacuum filter molding of high quality and high purity alumina polycrystalline fiber curing furnace.

2. using Japanese technology molding.

3. The spacing and pitch of the resistance wire in the furnace are all arranged according to the mature thermal technology in Japan, and the temperature field is simulated by thermal software

Control accuracy

 ±1 ℃

Maximum temperature

 1050 ℃

Rated temperature

 1000 ℃

Surface temperature

  ≤45℃

Matters need attention

1. For safety, please put the stove in a ventilated place.

2. in order to improve the service life of the furnace, we recommend that the heating rate does not exceed 10℃/min. Cooling rate does not exceed 5℃/min.

3. The furnace has no vacuum sealing, and toxic or explosive gases are prohibited.

4. It is forbidden to place the material directly on the cushion brick at the bottom of the furnace. Please place the material in a special crucible.

5. when heating, the material and crucible do not touch the heating element and thermocouple 6. if not used for a long time, please oven again.