1. Function overview:

This model is suitable for manual die-cutting of the pole pieces after the gap coating and rolling of the lithium battery.

This machine is a simple manual punching equipment. First, the pole piece is manually placed in the punching area, and then the start button is controlled with both hands. The booster cylinder or servo motor generates pressure to make the die punch the pole piece. After punching and forming, it is manually cut. take out.

2. Basic parameters:

1. Configured power supply: AC220V/50Hz Power: 0.1KW (prepared by the user)

2. Compressed air: ≥0.6MPa 30L/Min (user-supplied)

3. Equipment weight: about 400Kg

4. Dimensions (approx.): (length x width x height) ≈ 870×810×1950 mm (subject to the actual size of the device)

5. Device Color: International Warm Gray

3. Technical parameters

1. Punching area: 450X450mm;

2. Feed width: <480mm;

3. Positive electrode: aluminum foil thickness 12-25μm, total thickness 70-150μm;

4. Negative electrode: copper foil thickness 8-25μm, total thickness 70-150μm;

5. Die type: metal mold;

6. Driving power: gas-liquid booster cylinder or servo motor;

7. Product qualification rate ≥ 98%

8. Equipment utilization rate ≥ 95%

4. Process performance

1. Use gas-liquid booster cylinder or servo motor to punch the pole pieces;

2. Equipped with light curtain protection device;

3. Manual double-button control die-cutting and punching;

4. With emergency stop button and time controller;

5. The surrounding area is protected by transparent acrylic sheet.

5. Introduction

1. Square-pass welding frame: all rectangular square-pass welding, supported by four foot cups;

2. Pollution-free, high-thrust gas-liquid booster cylinder.

6. Main configuration

1. Gas-liquid booster cylinder: domestic

2. Light curtain: SUNX/Lane

3. Servo motor: Delta/Inovance or equivalent brand